english english english english
Volkswagen ID.4 Owners & Service Manuals

Volkswagen ID.4: Installing the front towing eye

Volkswagen ID.4 2021-2026 (E21) Owner's Manual / Installing the front towing eye

Depending on the market and specific equipment configuration of the Volkswagen ID.4, the threaded mount for the towing eye is located behind a removable cover in the front bumper. This design ensures both aesthetics and protection when the towing eye is not in use.

1. Before towing your Volkswagen ID.4, always confirm that the vehicle is equipped with a threaded mount for the towing eye.

2. Carefully read and follow all towing-related instructions to avoid damage or unsafe conditions.

3. If you are unsure or if the mount is not available, contact an authorized Volkswagen dealer or authorized Volkswagen Service Facility to arrange professional towing assistance.

The towing eye should always be stored in the vehicle for emergencies → Volkswagen ID.4 towing eye stored in vehicle tool kit in luggage compartment.

NOTICE

Using an incorrect or incompatible towing eye with the Volkswagen ID.4 may result in serious vehicle damage.

  • Always use the original towing eye supplied with your Volkswagen ID.4 or an approved equivalent from the vehicle tool kit.

Installing the front towing eye

Volkswagen ID.4 front bumper cover removal towing eye access point
Fig. 1 In the right front bumper: Remove cover.

Volkswagen ID.4 front towing eye installation screwing into threaded mount
Fig. 2 In the right front bumper: Screw in towing eye.

1. Remove the towing eye from the Volkswagen ID.4 vehicle tool kit located in the luggage compartment.

2. Press on the marked section of the bumper cover in the direction of the arrow to release the locking mechanism → fig. 1.

3. Carefully remove the cover. You may allow it to hang temporarily or store it safely inside the Volkswagen ID.4 → Volkswagen ID.4 front bumper cover removed exposing towing eye mount.

4. Screw the towing eye clockwise into the threaded mount as far as it will go → fig. 2 → Volkswagen ID.4 towing eye fully tightened in front mount.

Use a suitable tool if necessary to ensure the towing eye is tightened firmly and securely.

5. After towing the Volkswagen ID.4, unscrew the towing eye by turning it counterclockwise.

6. Reinstall the cover by pressing it into place until it clicks securely.

7. Clean the towing eye if needed and return it to the vehicle tool kit.

NOTICE

If the towing eye is not fully tightened, it may detach during towing, potentially causing serious damage to the Volkswagen ID.4.

  • Always ensure the towing eye is completely screwed in and firmly secured.

NOTICE

Improper handling when removing or installing the cover and towing eye may damage the paintwork or body components of the Volkswagen ID.4.

  • Handle all parts carefully to maintain the vehicle’s finish and integrity.

Volkswagen ID.4 2021-2026 (E21) Owner's Manual

Volkswagen ID.4 2021-2026 (E21) Owner's Manual

Actual pages

Beginning midst our that fourth appear above of over, set our won’t beast god god dominion our winged fruit image

© 2024-2026 Copyright www.vw-id4.com 0.0049